問題: How do I check if the system can support Secure Boot?(10/1/2021) 回答: In order to use Secure Boot, the drive with the operating system must use GPT partition style. Please refer to below steps to check the partition style.
Step 1: Right-click the Windows button on the desktop and select "Disk Management”.
Step 2: Right-click the disk where Windows is installed and select the "Properties”.
Step 3: Click the "Volumes” tab and check if the partition style is "GPT”.
Step 4: If the partition style is "MBR”, please make a backup of important data on the system and refer to steps 5 - 7 to convert the partition style to GPT.
Step 5: Type "CMD" in the Windows search bar, right-click on "Command Prompt” and choose to run as administrator.
Step 6: Type the command "mbr2gpt /convert /allowFullOS” to convert the partition style and press [Enter].
Step 7: Restart the system and the BIOS Mode/Partition style will be converted to UEFI/GPT.
問題: Why does the ASRock Timing Configurator show strange values, and how can I use this OC software under Windows 11? (10/1/2021) 回答: Microsoft® Windows 11® has a security function called "Memory integrity”. This function can prevent attacks from inserting malicious code into high-security processes, but it will interfere with the ability to read sensor values and affect the function of OC software.
We recommend temporarily disabling this function when you would like to use OC software. Please refer to the following steps to deactivate it.
Step.2 Press "Core isolation details”.
Step.3 Disable "Memory integrity” and restart the system to apply the setting.
問題: I cannot adjust the equalizer settings in the Nahimic3 utility ver:1.4.15. Where can I find the settings?(2/1/2021) 回答: To use the equalizer in the Nahimic3 utility, please refer to the following steps to activate it.
Step 1. Download and install Nahimic3 utility ver:1.4.15 from the ASRock website.
問題: I cannot control the RGB lighting via RAZER Synapse on my X570/B550 Taichi Razer Edition motherboard. How do I solve this problem?(1/1/2021) 回答: Please flash the RGB controller firmware by following the steps below.
Step 1. Download the firmware file from ASRock website and extract the compressed file.
Step 2. Execute "UpdateFW.cmd” to update the RGB controller firmware.
Step 3. After step 2 please wait for 10 seconds or so and the firmware flash will finish.
Step 4. After the message "update firmware SUCCESS” is shown please restart your system.